Clutch slave cylinder

All Princess models specific items.
Post Reply
Chris chapman
Posts: 41
Joined: Mon Feb 25, 2019 10:02 pm

Clutch slave cylinder

Post by Chris chapman » Thu Jan 02, 2020 10:00 pm

Hi everyone. Happy new year. Could anybody tell me please if there should be a spring on the little arm that goes into the gearbox and into the slave cylinder. I see a picture on here and that one had it where as my one doesnt. Mine is a 1.8. Thanks

User avatar
Gasman
Posts: 2097
Joined: Thu Aug 29, 2013 4:37 pm
Location: Shawford, Winchester, UK
Contact:

Re: Clutch slave cylinder

Post by Gasman » Fri Jan 03, 2020 3:24 pm

Someone will correct me if I'm wrong but I don't remember a spring on the 1800. You may have been looking at a photo of the O series (1.7 or 2.0) which does indeed have a spring.
Martin
Club Treasurer


Owner of:
Oldest known surviving wedge, hand-built 15th Pre-Production Wolseley in June 1974
Last Ambassador down the line in November 1983, Austin Ambassador VDP

Chris chapman
Posts: 41
Joined: Mon Feb 25, 2019 10:02 pm

Re: Clutch slave cylinder

Post by Chris chapman » Fri Jan 03, 2020 5:49 pm

I think it was the 1.7 one I was looking at. Wonder why it was changed.

Post Reply